Thursday, 28 February 2013

Hooded Cape DIY for Babies and Toddlers

Casper has worn hooded capes for the entirety of his little life. I started making them after I got bored with a cardigan I was knitting whilst pregnant. I decided to make it into a cape with a hood and a fabric button-up yoke. Then I started making them out of old blankets and other discarded knitting projects and then I realised I had heaps of old woolens that had holes or were unflattering or not the right size. 

I came up with this method one night when I was half asleep and had to write it down to remember it later (I had a five month old baby at the time). I have always thought I would keep it a secret just in case I get signed to write a super cool recycled sewing book one day but then I realised that there might be people out there with piles of old woolens that they don't know what to with because they have already made too many felted hot water bottle covers. FYI, you can have too many of those.

Casper has worn most of his capes from the newborn stage right through to toddlerdom, so most of the time they are one-size fits all. Great for Autumn and Spring and a nice handmade gift that can be quickly put together for all those last minute baby showers.

It's a very simple tutorial, albeit quite image heavy. You should be able to make this cape if you have a sewing machine that sews zig-zag and straight stitch (or if you are a dedicated hand sewer, you can absolutely hand-stitch this). The only fancy thing that I recommend you buy is a stretch needle for your machine as this should lessen the puckering of your seams.

I have to warn you, these things are addictive and easy to make.

Okay so... Ingredients: 

One wooly jumper (sweater, pullover) if possible in a size medium women's or small men's unless you want to make an adult hooded cape (please somebody do this!!!)
A pair of sewing scissors
A stretch fabric needle 
A strip of fabric 13cm (5'') wide by 112cm (44'') long
Sewing thread

So you begin with a jumper. Lay it out flat on a large-ish cutting table.

Cut the bottom of the jumper off just under the armpits in a straight line, the arms in half and the neckline too!

You should be left with something that looks like this ^^^ The arm pieces on my jumper ended up being about 26cm (10'') by 21cm (8'') but don't worry too much about this as you will have the opportunity to trim these pieces down. Don't throw away the pieces of wool not included in the photo. I will be writing another tutorial about how to turn them into some stylin' mittens!

Find the seam on the larger, bottom part of the jumper and cut directly along it.

You should have a long piece of material that looks like that ^ This will be your cape piece.

Do the same to the arm pieces, these will be your hood.

And to the ribbing from the ex-neckline, do the same. This will be the pretty binding on the hood.

Right sides facing, straight stitch down the smaller edge of the hood pieces.

Right sides facing, pin and sew ribbing to long end of the hood pieces with a straight stitch.

Flip to the right side up, and top-stitch seam.

Your hood now looks like this, right side up!

Right sides facing, pin remaining "long edge" of hood and sew right down.

Trim any excess fabric at the bottom of the hood.

Turned out, your hood should be looking pretty snazzy (and finished)!

Okay now for the cape part. Cut the ribbed edge of your cape piece off at a width of 4cm (1.5'').

Cut the long piece of ribbing in half and pin to either side of the edge of your cape, right sides facing.

Sew and topstitch these seams with a straight stitch.

Trim excess, and you should have a neat looking finished edge.

Now if you've never gathered before, you should probably have a look at this tutorial. Don't be scared, it's fun!

Gather the remaining ribbed edge of the cape piece to be the same size as the base of the hood.

Now this part is tricky. Wrong sides facing, pin the gathered cape piece to the hood, making sure they are the same length.

Sew seam with a 3cm (1'') allowance.

It should look like this.

Reinforce these pieces by topstitching down.

Here's where your fabric strip will come in handy, try to choose something that will complement the colour of your cape.

Fold fabric in half lengthwise and sew as shown in the photo above, making sure to leave a gap in your outside seam approximately halfway (allowance for turning strip).

Once you have stitched and turned your fabric strip, it should look like this ^ and is now the tie to your cape!

Pin the cape-tie to the raw seam on the right side of your cape, (concealing the ugly bulk of combining the gathered wool to the hood).

Sew the tie down with a zig-zag stitch on both sides.

Roll-hem the bottom of the cape with a straight stitch. Remember- a stitch in time, saves nine so please double hem this as knits have the tendency to grow ladders!

And...... you're done!

And because you should never forget where you came from x

I welcome any comments you might have on how I could improve this and any other tutorials I have posted. please let me know of any problems you have with understanding these instructions.

Tuesday, 26 February 2013

Casper Cape

Today I made Casper a little hooded cape out of an old jumper (sweater). I am writing up a tutorial for these as they are great for those in-between seasons, Autumn and Spring. We're all going into either season, right? They are super easy to make once you get the hang of it, they are recycled and extremely scrumptious.  Casper has had several capes like this that I have made, you can see them here, here, here and here.

P.S- His hair isn't greasy, it's like 30 degrees here right now and he's a little sweaty head!